SURFACE PREP LIKE A PRO

Get the job done with E2U's Rapid Mender & Crack Repair

SURFACE PREP LIKE A PRO

Get the job done with E2U's Rapid Mender & Crack Repair

Easily Repair or Fill Spalls, Cracks & Joints

Easily Repair or Fill Spalls, Cracks & Joints

Mender_Full Kit

RAPID MENDER

Cure Time: Approx. 15-20 minutes dry to touch

 

E2U Rapid Mender™ is a high-penetration two-part polyurea that when combined with an optional grit size silica sand creates a VERY strong concrete spall, joint and crack filler. This nearly water-thin formula to fill in imperfections in your concrete surface prior to applying decorative coatings for a smooth flat, imperfect surface. Can be mixed and applied in a wide range of temperatures but when applied at approx. 72 degrees, time to grind flush w/surface will be approximately 20 minutes.

Surface Prep Doesn't Have To Be A Chore! E2U's Polyurea Crack Repair Kit Makes It Easy!

Surface Prep Doesn't Have To Be A Chore! E2U's Polyurea Crack Repair Kit Makes It Easy!

Polyurea-Crack-Repai–Kit-22oz.jpg-Crack_Repair_Kit_Hover600

E2U Polyurea Crack Repair Kit - 22oz

Cure Time: Approx. 2 hours dry to the touch

Crack Repair is a 2-component, elastomeric sealing polymer system designed to act as a crack filler primarily in concrete. This material provides exceptional adhesion characteristics and fast cure times. It is highly chemical and abrasion resistant, UV stable, insensitive to water, and remains thermally stable in a range of -20°F (-29 C) to 250°F (125 C). It may be used under traditional floor coatings or any of our top-coating materials. Crack Repair is used in heavy traffic warehouse floors, refrigeration floors, chemical spill-prone floors, pothole road repair or under ceramic tile floors. It meets FDA regulations for indirect food contact (CFR 21, Sec. 175-300).


Polyurea-Crack-Repair-22ozCrack_Repair2_Hover600

E2U Polyurea Crack Repair Kit - 22oz

Cure Time: Approx. 2 hours dry to the touch

Crack Repair is a 2-component, elastomeric sealing polymer system designed to act as a crack filler primarily in concrete. This material provides exceptional adhesion characteristics and fast cure times. It is highly chemical and abrasion resistant, UV stable, insensitive to water, and remains thermally stable in a range of -20°F (-29 C) to 250°F (125 C). It may be used under traditional floor coatings or any of our top-coating materials. Crack Repair is used in heavy traffic warehouse floors, refrigeration floors, chemical spill-prone floors, pothole road repair or under ceramic tile floors. It meets FDA regulations for indirect food contact (CFR 21, Sec. 175-300).


Polyurea-Crack-Reapair-Applicator-GunCrack_Repair_Gun_Hover600

E2U Polyurea Crack Repair Applicator Gun

Cure Time: Approx. 4 to 6 hours dry to the touch

Our Polyaspartic ULTRA is the ideal product when extremely low odor, durability and UV stable system are required. Polyaspartic ULTRA has essentially zero odor. The ideal applications are hospitals, restaurants, kennels, veterinary facilities, health care facilities, and garages etc. It is a two-component, extremely chemical resistant, and non-yellowing aliphatic polyaspartic. It features high gloss, high build, and a cure time of 4 to 6 hours, and generally return to service in 24 to 48 hours. It can be installed in extremely high or low temperatures.


Polyurea-Crack-Repai–Kit-22oz.jpg-

E2U Polyurea Crack Repair Kit - 22oz

Cure Time: Approx. 12-15 minutes dry to touch

Crack Repair is a 2-component, elastomeric sealing polymer system designed to act as a crack filler primarily in concrete. This material provides exceptional adhesion characteristics and fast cure times. It is highly chemical and abrasion resistant, UV stable, insensitive to water, and remains thermally stable in a range of -20°F (-29 C) to 250°F (125 C). It may be used under traditional floor coatings or any of our top-coating materials. Crack Repair is used in heavy traffic warehouse floors, refrigeration floors, chemical spill-prone floors, pothole road repair or under ceramic tile floors. It meets FDA regulations for indirect food contact (CFR 21, Sec. 175-300).