Superior Countertop Epoxy
$45.00 – $1,685.75
-
E2U Countertop Epoxy is a revolutionary formula prevents hot pots from leaving marks on the surface of the epoxy. It is self-leveling, zero VOC, essentially odorless, and is typically applied at a 22-25 mil thick single coat (50 sqft./gal). This dynamic blend does not require activator to be sprayed on the surface to obtain a unique and highly decorative look. It meets USDA requirements for incidental food contact. This material cures blush-free and provides an outstanding balance of physical strength and flexibility.
- *Coverage:
- 50 sq. ft./gal. at 24 mil.
- - Scratch-resistant
- - Chemical and impact resistant
- - ZERO VOC
- - 100% non-toxic (food safe) and anti-bacterial
- - Long working time
- - Excellent flowability
- - Self leveling
- - No amine blush
- - High gloss & color stability
- - Modified to be highly UV resistant
- 50 sq. ft./gal. at 24 mil.
SUPERIOR COUNTERTOP EPOXY | MIX RATIO 2 PARTS A & 1 PART B
PRODUCT DESCRIPTION
A 2 to 1 mix ratio, 100% solids epoxy designed to be applied to countertops or tables either clear or mixed w/Metallic Pigment. At 72 degrees F, you will have approx. 45 minutes of work time after pouring out. Typically applied at 3 oz. per SQFT or 45 SF/Gal. Gets extremely hard when fully cured, has "Fair" heat resistance, is made with an exceptional combination of UV Resistant and Flow / Leveling additives making it EXTREMELY user friendly.PRODUCT DATA
Volumetric Ratio: 2 to 1 Solids: 100%(+/- 1%) Coverage: 50 SF/gal. at 24 mil or Approx 3 oz per sqft Application Temperature: 55°-90°F Thinning: Not Required Pot Life: Mix and Immediately Pour Working Time: 45-60 min. Full Cure: 45-60 min. Critical ReCoat Time : 12 hrs Shelf Life: 12 months USDA Food & Beverage: Meets Req.APPLICATIONS
Superior Countertop Epoxy can be applied on Concrete, Granite, Laminate, Cork, Formica, Quartz, Corian.ADVANTAGES
• Self Leveling • Essentially odorless • ZERO VOC • High gloss, & color stability • Long Working Time • Chemical & impact resistant • No amine blush • Modified to to be highly UV resistance • Excellent flowabilityPREPARATION
Before coating is applied, surface must be: • Dry – No wet areas • Clean – Contaminants removed • Profiled – Surface etched • Sound – All cracks and spalled areas repaired Do not scrape sides or turn container over and allow to drain when pouring out mixed epoxyCLEAN UP
Superior Countertop Epoxy, while in an un-reacted state, may be cleaned up with hot water and degreaser. Isopropyl alcohol or acetone may be needed once the resin begins hardening.APPLICATION INSTRUCTIONS
Application of E2U Superior Countertop Epoxy for a nominal 20 to 25 mil coating system is applied in a single coat. 1. Optimum ambient temperature should be between 60-85°F during application. Temperatures of 55°F and lower can slow cure times. Temperatures of 85°F and higher will speed up working and times. TECHNICAL DATA SHEET SUPERIOR COUNTERTOP EPOXY MIX RATIO 2 PARTS A & 1 PART B 2. Apply at approximately 50 SF/gal by immediately pouring out blended material until Bucket is empty. 3. Using a roller, handheld notched squeegee or just your gloved hands pull E2U Superior Countertop Epoxy at a uniformed thickness over areas to be coated. 4. Make sure to use non-shedding phenolic (plastic) core paint roller. 5. Lastly, back roll in the opposite direction.MIXING
The ratio of Superior Countertop Epoxy is 2 to 1. That is, two parts A (resin) to one part B (hardener). Mix the following with a drill and mixing paddle. Note: If using a drill mixer, use a low speed (not to exceed 300 rpm) to prevent air entrapment. 1. Premix (1)16 oz jar of Metallic Powder into the 1gal of “A” Resin Container for 3 to 5 minutes. Allow to stand for minimum of 5 - 10 minutes to allow any air mixed in to escape. 2. Add 1/2 gallon of Part “B” Hardener and mix for another 60-90 seconds. 3. E2U Epoxy is designed to be immediately poured on the countertop. Leaving mixed product in the container will greatly reduce pot life. Once poured out you will have approximately 45-60 minutes of working time can generally be expected.WARNING! SLIP AND FALL PRECAUTIONS
OSHA and the American Disabilities Act (ADA) have now set enforceable standards for slipresistance on pedestrian surfaces. The current coefficient of friction required by ADA is .6 on level surfaces and .8 on ramps. E2U Flooring recommends the use of angular slip-resistant aggregate in all coatings or flooring systems that may be exposed to wet, oily or greasy conditions. It is the contractor and end users’ responsibility to provide a flooring system that meets current safety standards. E2U or its sales agents will not be responsible for injury incurred in a slip and fall accident.Handling Precautions
We believe this product complies with all other applicable state and federal laws and regulations governing manufacturing, distribution and intended use. User is solely responsible for the legal disposal of this container and/or its contents.WARRANTY
E2U products are warranted for one year after date of purchase. Please refer to the Limited Material warranty for additional clarification.E2U Countertop Epoxy is a revolutionary formula prevents hot pots from leaving marks on the surface of the epoxy. It is self-leveling, zero VOC, essentially odorless, and is typically applied at a 22-25 mil thick single coat (50 sqft./gal). This dynamic blend does not require activator to be sprayed on the surface to obtain a unique and highly decorative look. It meets USDA requirements for incidental food contact. This material cures blush-free and provides an outstanding balance of physical strength and flexibility.
Weight | 1 lbs |
---|---|
Size | 48OZ, 1.5 GAL, 3 GAL, 15 GAL |
Color | Clear, White |