Stem Coat
June 11, 2021
Table Top Epoxy
June 11, 2021
Show all
6150-600
6150-600

Epoxy 6150

$222.79$1,647.31

E2U Epoxy 6150 is VOC-compliant, high solids, 2-component, and designed as a base coat for color flake (chip) flooring. This application can be applied to new and existing concrete.

Our Epoxy 6150 formula allows a typical floor to be installed within one day and provides excellent adhesion and hide to concrete in a single coat application. Epoxy 6150 withstands up to 9 lbs of moisture vapor emissions. Epoxy 6150 adheres to damp or dry concrete and gives ample open time for broadcasting the color flakes (chips). Adding E2U Accelerator will speed up a dry time to as little as 2 hours.

IMPORTANT NOTE:
If full broadcast of flake chips is not disbursed, sanding will be required.



  • Coverage:
  • 200 – 225 SF/Gal Over freshly profiled concrete.
  • Perks to this Epoxy are – Highest adhesion rating to concrete, “350”, Lifetime Adhesion Warranty on residential garage floors, Holds back up to 9 lbs. of Moisture Vapor Transmission.
  • NOTE:
  • This epoxy is specifically designed to be a PRIMER COAT ONLY! You must broadcast to refusal or topcoat this product w/another coat of either “PIGMENTED” Epoxy or Sealer or risk serious ambering.
SKU: 6150-KT Categories: , , ,
  • - Essentially odorless
  • - Self-priming over properly prepared substrate
  • - Lifetime adhesion warranty
  • - VOC compliant
  • - High color stability
  • - Chemically Resistant
  • - Withstands up to 9 lbs of moisture vapor emissions
  • - Can be accelerated to dry in 2 hours
  • - Low viscosity
  • - Garage floors
  • - Clean rooms
  • - Manufacturing facilities
  • - Automotive showrooms
  • - Commercial kitchens
  • - Grocery stores
  • - Laboratories
  • - Basements
  • - Kennels
  • - Restrooms
  • - Locker rooms
  • - Aisle ways
  • 200 – 225 SF/Gal Over freshly profiled concrete.

  • Perks to this Epoxy are – Highest adhesion rating to concrete, “350”, Lifetime Adhesion Warranty on residential garage floors, Holds back up to 9 lbs. of Moisture Vapor Transmission.

  • NOTE:
  • This epoxy is specifically designed to be a PRIMER COAT ONLY! You must broadcast to refusal or topcoat this product w/another coat of either “PIGMENTED” Epoxy or Sealer or risk serious ambering.
Weight 1 lbs
Size

2 GAL, 15 GAL

Color

Clear, White, Light Gray, Medium Gray, Dark Gray, Black, Tan, Mocha, Beige

X