100% SOLIDS EPOXY
Cure Time: Approx. 5 to 6 hours dry to the touch
E2U 100% Solids Epoxy is a 2-component high-performance, modified cycloaliphatic epoxy concrete floor coating system. This particular epoxy has features for high-gloss, low odor, solvent-free, low viscosity, low abrasion, and chemical resistance. It has excellent bonding characteristics and it can be applied as a 20-30 mil coating system. Chips or Silica Sand can be broadcast into this epoxy to create a custom look. Its design features provide for the highest industrial and commercial demands.
EPOXY ACCELERATOR
Cure Time: Approx. 2 hours dry to the touch
E2U Epoxy Accelerator is a special additive for use with epoxies (100% Solids Epoxy, Epoxy 6150 & Moisture Vapor Barrier (MVB) Epoxy) to accelerate the cure rate and allow for coating application at temperatures down to 35 F (2 C). E2U Epoxy Accelerator is an additive to be used for both pigmented and clear epoxies. NOTE: E2U Epoxy Accelerator greatly increases the cure rate of these systems, reducing both pot life and dry time.
